VON DUPRIN INTRODUCES GUARD-X EXIT ALARM LOCK
A new Series 2670 Exit Alarm Lock from Von Duprin provides
secure, alarmed code-compliant protection for emergency exits.
Called Guard-X, the new exit alarm lock readily identifies the door
on which it is mounted as an emergency exit and secures the opening
against unauthorized use. It is ideal for helping reduce theft in
restaurants, retail establishments and similar facilities due to
unauthorized exit through emergency exit-only doors.
GUARD-X is designed for new and existing construction. It
complements the existing Von Duprin Chexit® controlled
exit device and ALK alarm kit by providing a combination of alarm
and deadbolt functions. It does not allow relatching or resetting
the alarm after an unauthorized exit, other than by an authorized
person with a key.
The new exit alarm lock provides secure protection. With a large
stainless steel deadbolt that is 2" x 1/2" and has a
3/4" throw, the engagement area into the strike is over 1
1/4" square inches. A cast aluminum latch cover guards the exit
alarm from attack or vandalism from inside or outside of the door.
Six screws are used for mounting the lock to the door. The unit will
withstand up to 1600 pounds of static load force. It can be operated
from the building exterior by a standard rim cylinder, so an
authorized user can easily arm or disarm it to enter the building
when required.
A 100-decibel alarm provides a clear, attention-getting warning
of an unauthorized exit or attempted exit. A built-in flashing LED
shows at a glance that the device is armed. An audible low-battery
alert signals the owner to replace the battery when necessary. An
optional external power supply allows Guard-X to be hardwired,
eliminating the need to change batteries. The unit's battery then
functions as a backup power to operate the alarm if power fails or
is tampered with.
The Guard-X complies with the NFPA 101® Life Safety
Code. It is UL305 Panic Exit Hardware certified for use on Emergency
Exit applications, and it meets ANSI A156.3 Grade 1 Panic Hardware
requirements.
Installation takes just a few minutes with an easy-to-use
location adhesive back template. The product's non-handed design
means the installer can mount GUARD-X for either hand by just
removing and reversing the "Emergency Exit-Alarm Will
Sound" sign built into the device. The standard warning sign
includes the same Braille message.
It is available in US28 (aluminum), 315AN (black) and
313AN(duranodic brown) finishes to more closely match the finish of
the opening.
|
